Is the Stabilizer Output Voltage Adjustable to 400V?

SBW, DBW series single and three-phase automatic compensation voltage stabilizers are designed to stabilize AC voltage by introducing and absorbing the advanced technology from Western Europe and combining it with Chinese national conditions. When the voltage of the external power supply network fluctuates or the load changes and the voltage fluctuates, it can automatically maintain the stability of the output voltage.

Compared with other types of voltage stabilizers, this series of products has the advantages of large capacity, high efficiency, no waveform distortion, stable voltage regulation, etc. It is suitable for a wide range of loads, can withstand instantaneous overload, and can work continuously for a long time. Overvoltage, overcurrent phase loss, phase sequence protection, and automatic mechanical fault protection, as well as small size and lightweight. It has the advantages of convenient installation and reliable operation.

ATO voltage stabilizers

Recently, many customers have asked the same question. Want to adjust the output voltage to 400V? One of the customers is a voltage stabilizer used in printing machines. Their voltage is usually 360V-390V. They hope that the voltage can be maintained at 400V after reaching the workshop. Can our equipment meet this requirement?

This is of course possible. The standard voltage regulation range of our voltage stabilizer is 380V±20%, so the output voltage of the voltage stabilizer can be adjusted between 304V and 456V.

Our voltage stabilizers are divided into two types: Single-phase voltage stabilizers and three-phase voltage stabilizers. Single-phase voltage stabilizer is what we call mains power. The output voltage is generally 220V, and of course, some are 240V or 215V. A three-phase voltage stabilizer is also what we call industrial electricity. The general output voltage is 380V, and there are also 415V, 400V, etc., and the conventional 380V is mostly. What should I do when the output is too high or too low? Can I adjust it to normal by myself?

Of course, ATO voltage stabilizer is controlled by software and hardware, and the true RMS value is displayed. You can directly set the input voltage, output voltage, current, and other parameters on the LCD liquid crystal display screen, and the operation is simpler and more intuitive.

Here we need to remind you: when operating, you need to have the basic electrical common sense to perform various operations under the guidance of our technical staff to avoid misoperation.

Leave a Comment

Your email address will not be published. Required fields are marked *